Potential Energy of Elastic Band

AI Thread Summary
The discussion centers on calculating the elastic potential energy of a stretched elastic band released from a height of 95 cm, with a mass of 0.55 g and a horizontal displacement of 3.7 m. Initial attempts to find the energy resulted in a negative value, prompting a reevaluation of the equations used. Participants clarified that at the moment of release, all energy is stored as potential energy, which converts to kinetic energy as the band snaps and moves horizontally. The time of flight is crucial for determining the horizontal velocity, which remains constant due to negligible air resistance. Ultimately, one participant calculated the elastic potential energy to be 0.019 J after considering the necessary adjustments in their approach.
ppkjref
Messages
18
Reaction score
0
Elastic Potential Energy of Elastic Band*

Homework Statement


A stretched elastic band of mass 0.55 g is released so that its initial velocity is horizontal, and its initial position is 95 cm above the floor. What was the elastic potential energy stored in the stretched band if, when it lands, it has a horizontal displacement of 3.7 m from the initial position under negligible air resistance?

Homework Equations


vf^2 = vi^2 + 2ad
Ee = Ek - Eg

The Attempt at a Solution



vf^2 = vi^2 + 2ad
0 = vi^2 + 2ad
2(9.8)(0.95) = vi^2
4.32 m/s = vi

Ee = Ek - Eg
Ee = 0.5mv^2 - mgh
Ee = (0.5)(0.55)(4.32)^2 – (0.55)(9.8)(3.7)
Ee =
I get a negative number?
 
Physics news on Phys.org
ppkjref said:
Elastic Potential Energy of Elastic Band*

Homework Statement


A stretched elastic band of mass 0.55 g is released so that its initial velocity is horizontal, and its initial position is 95 cm above the floor. What was the elastic potential energy stored in the stretched band if, when it lands, it has a horizontal displacement of 3.7 m from the initial position under negligible air resistance?


Homework Equations


vf^2 = vi^2 + 2ad
Ee = Ek - Eg

The Attempt at a Solution



vf^2 = vi^2 + 2ad
0 = vi^2 + 2ad
2(9.8)(0.95) = vi^2
4.32 m/s = vi

Ee = Ek - Eg
Ee = 0.5mv^2 - mgh
Ee = (0.5)(0.55)(4.32)^2 – (0.55)(9.8)(3.7)
Ee =
I get a negative number?

I don't think you can set vf = 0. It could have been still moving horizontally when it hit the floor.

Instead, relate the initial KE stored to the initial horizontal velocity as one equation. Then relate the time of flight to the distance traveled and the horizontal velocity (which won't change over time). And how long does it take something to drop vertically from that height...?
 
I'm not sure what you mean. Initially wouldn't there only be elastic potential stored? KE is 1/2mv^2 and the horizontal velocity is d/t? I don't know what time is
 
ppkjref said:
I'm not sure what you mean. Initially wouldn't there only be elastic potential stored? KE is 1/2mv^2 and the horizontal velocity is d/t? I don't know what time is

Yes, initially at time t=0-, all energy is stored as PE. But as the band is snapped and starts flying at t=0+, all that PE was converted into KE of horizontal motion. The horizontal velocity remains constant (ignoring air resistance), and the vertical motion follows the usual kinematic equations of motion for constant acceleration (gravity).

The "time" is the time between release and hitting the floor. Try writing the equations out that I alluded to in my previous post, and see where they lead you. I'll try to check back in a few hours...
 
Last edited:
Ok I got 0.019 J as my final answer. Thanks for the help
 
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Correct statement about a reservoir with an outlet pipe'
The answer to this question is statements (ii) and (iv) are correct. (i) This is FALSE because the speed of water in the tap is greater than speed at the water surface (ii) I don't even understand this statement. What does the "seal" part have to do with water flowing out? Won't the water still flow out through the tap until the tank is empty whether the reservoir is sealed or not? (iii) In my opinion, this statement would be correct. Increasing the gravitational potential energy of the...
Back
Top