Preventing Egg Smashing: Strategies for a Safe Landing

AI Thread Summary
To prevent an egg from smashing upon a 4-meter drop, focus on understanding the forces at play rather than complex calculations. The key factor is the impact force when the egg hits the ground, which can be mitigated through cushioning materials or designs that slow the egg's descent. Trial and error is a practical approach, especially if multiple eggs are available for testing. Consider methods used in sports or engineering to protect against falls, as these principles can be applied to your egg drop challenge. Experimenting with different materials and designs will help achieve a successful landing without breaking the egg.
zone32
Messages
2
Reaction score
0
Hello, I'm in 8th grade (In sweden, I think its 7th grade in US)
And I'm supposed to stop an Egg from smashing the ground, and we are dropping it about 4 meters above the ground.

Do I need to calculate anything in order to figure out how to stop it from breaking/smashing.
And If I do how do I calculate it?

I'm not very good at Physics so I'm having a little hard time explaining.
 
Physics news on Phys.org
Hej zone32,
:welcome:

You don't need to calculate anything, especially if you have access to a large supply of eggs: nothing beats trial and error :wink:

What you should think about is what is causing the egg to break (it is certainly not the fall itself, is it?). Think also about all the ways you know that someone falling has of not getting hurt.
 
  • Like
Likes zone32
DrClaude said:
Hej zone32,
:welcome:

You don't need to calculate anything, especially if you have access to a large supply of eggs: nothing beats trial and error :wink:

What you should think about is what is causing the egg to break (it is certainly not the fall itself, is it?). Think also about all the ways you know that someone falling has of not getting hurt.
Alright thanks!
 
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Correct statement about a reservoir with an outlet pipe'
The answer to this question is statements (ii) and (iv) are correct. (i) This is FALSE because the speed of water in the tap is greater than speed at the water surface (ii) I don't even understand this statement. What does the "seal" part have to do with water flowing out? Won't the water still flow out through the tap until the tank is empty whether the reservoir is sealed or not? (iii) In my opinion, this statement would be correct. Increasing the gravitational potential energy of the...
Back
Top