Solved Dynamics Question #3: Calculate Velocity, Momentum, and Force

  • Thread starter Thread starter looi76
  • Start date Start date
  • Tags Tags
    Dynamics
AI Thread Summary
A ball with a mass of 0.20 kg is dropped from a height of 2.5 m and bounces back to 1.6 m, with gravity at 9.81 m/s². The velocity upon hitting the floor is calculated to be 7.0 m/s, while the velocity as it leaves the floor is 5.6 m/s. The change in momentum due to the impact is determined to be 2.5 kg·m/s. Additionally, the average force exerted by the floor on the ball during a 40 ms impact is calculated to be 63 N. The calculations and answers provided are confirmed to be correct.
looi76
Messages
80
Reaction score
0
[SOLVED] Dynamics Question #3

Homework Statement


A ball of mass 0.20kg is dropped from a height of 2.5m and bounce back up to 1.6m. Taking the acceleration due to gravity as 9.81 ms^{-2}, calculate:
(a) the velocity of the ball as it hits the floor.
(b) the velocity of the ball as it leaves the floor.
(c) the change in momentum caused by the impact
(d) the average force of the floor on the ball if the impact time is 40ms.

Homework Equations


v^2 = u^2 + 2as
Change in momentum = Final momentum - Initial momentum
Force = Change in momentum / Time

The Attempt at a Solution



(a) v^2 = u^2 + 2as
v^2 = 0^2 + 2 \times 9.81 \times 2.5
v = \sqrt{2 \times 9.81 \times 2.5}
v = 7.0ms^{-1}

(b) v^2 = u^2 + 2as
v^2 = 0^2 + 2 \times 9.81 \times 1.6
v = \sqrt{2 \times 9.81 \times 1.6}
v = 5.6 ms^{-1}

(c) Change in momentum = Final momentum - Initial momentum
= mv - mu
= (0.2 \times 5.6) - (0.20 \times (-7.0))
= 2.5 kgms^{-1}

(d) Force = Change in momentum / Time

F = \frac{2.5}{40 \times 10^{-3}}

F = 63N

Are my answers correct?
 
Physics news on Phys.org
Yes, they look good.
 
Thank you dx
 
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Struggling to make relation between elastic force and height'
Hello guys this is what I tried so far. I used the UTS to calculate the force it needs when the rope tears. My idea was to make a relationship/ function that would give me the force depending on height. Yeah i couldnt find a way to solve it. I also thought about how I could use hooks law (how it was given to me in my script) with the thought of instead of having two part of a rope id have one singular rope from the middle to the top where I could find the difference in height. But the...
Back
Top