SOLVED: Elastic Collision, Same Direction

AI Thread Summary
In a perfectly elastic collision between a 100g ball moving at 4.1 m/s and a 400g ball moving at 1.0 m/s, the final velocities were calculated using conservation of momentum and energy equations. The final velocity of the 100g ball (V1f) was found to be approximately -0.86 m/s, indicating it rebounds in the opposite direction after the collision. The final velocity of the 400g ball (V2f) was calculated to be around 2.24 m/s, showing it gained speed. The discussion emphasized the importance of using the correct equations and understanding the implications of negative velocity in elastic collisions. The thread concluded with the problem being marked as solved.
PEToronto
Messages
7
Reaction score
0

Homework Statement


A 100g ball moving to the right at 4.1m/s catches up and collides with a 400g ball that is moving to the right at 1.0m/s .

a)
If the collision is perfectly elastic, what is the speed and direction of the 100g ball after the collision?

b)
If the collision is perfectly elastic, what is the speed and direction of the 400g ball after the collision?

Given Var.
m1 = 100 g = 0.1 kg
m2 = 400 g = 0.4 kg

V1i = 4.1 m/s
V2i = 1 m/s

V1f = ?
V2f = ?

Homework Equations


pi = pf
p1i + p2i = p1i + p2i
m1V1i + m2V2i = m1V1f + m2V2f

Ki = Kf
K1i + K2i = K1i + K2i
(1/2)m1V1i2 + (1/2)m2V2i2 = (1/2)m1V1f2 + (1/2)m2V2f2

The Attempt at a Solution



I first set up the equation for conservation of momentum:
pi = pf
p1i + p2i = p1i + p2i
m1V1i + m2V2i = m1V1f + m2V2f
(0.1)(4.1) + (0.4)(1) = 0.1V1f + 0.4V2f
2.081 = 0.1V1f + 0.4V2f

Solving for V1f
V1f = (0.81 - 0.4V2f) / 0.1

Now the equation for Conservation of energy:
Ki = Kf
K1i + K2i = K1i + K2i
(1/2)m1V1i2 + (1/2)m2V2i2 = (1/2)m1V1f2 + (1/2)m2V2f2
(0.1)(4.1)2 + (0.4)(1)2 = 0.1V1f2 + 0.4V2f2

Subbing the previous identity of V1f:
2.081 = (0.1)(4.1)2 + (0.4)(1)2 = 0.1((0.81 - 0.4V2f) / 0.1)2 + 0.4V2f2
2.081 = 6.561 - 6.48V2f + 1.6V2f2 + 0.4V2f2

Solving for V2f gives 0.9999 and 2.24
2.24 m/s is more reasonable, as the ball must have gained velocity during the collision rather than lost it.

Now solving for V1f:
2.081 = 0.1V1f + 0.4V2f
2.081 = 0.1V1f + 0.4(2.24)
V1f = (2.081 - 0.896) / 0.1
V1f = 11.85 m/s

I am concerned because I did not get a negative value for V1f, which I was expecting because it seems like the smaller first ball will rebound in the opposite direction. Is it also concerning that the final velocity of the smaller ball is much higher than the initial? am I missing a minus sign somewhere?

Thank you very much for taking a look
 
Last edited by a moderator:
Physics news on Phys.org
By plugging V2f into the Kinetic Energy Equation and solving for V1f, I get +/- 0.859. -0.859 seems more reasonable. Did I mess up again?
 
PEToronto said:
By plugging V2f into the Kinetic Energy Equation and solving for V1f, I get +/- 0.859. -0.859 seems more reasonable. Did I mess up again?
Looks right.
From momentum and energy conservation one can deduce this general equation for the components of velocity along the direction of impact: v1i-v2i = v2f-v1f. This Newton's Experimental Law for the special case of perfectly elastic collision. This often helps avoid getting tangled up in solving quadratics, producing a spurious extra solution.
As an exercise, see if you can derive it.
 
Thanks haruspex,
That formula looks very useful, and I'll try deriving it when i finish my homework.
V1f turned out to be -0.86 m/s. I'll rename this thread as 'solved'.

Thanks again!
PET
 
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Correct statement about a reservoir with an outlet pipe'
The answer to this question is statements (ii) and (iv) are correct. (i) This is FALSE because the speed of water in the tap is greater than speed at the water surface (ii) I don't even understand this statement. What does the "seal" part have to do with water flowing out? Won't the water still flow out through the tap until the tank is empty whether the reservoir is sealed or not? (iii) In my opinion, this statement would be correct. Increasing the gravitational potential energy of the...
Back
Top