Solving the Sound Wave Problem of Two Identical Violin Strings

AI Thread Summary
Two identical violin strings, both initially tuned to 440.0 Hz, produce a beat frequency of 1.5 beats per second when one string is retuned. The highest possible fundamental frequency of the retuned string is 441.5 Hz, while the lowest is 438.5 Hz, reflecting the beat frequency's influence. The fractional change in tension can be calculated using the relationship between frequency and tension, specifically that frequency is proportional to the square root of tension. If the frequency increases, the tension change ratio is derived from the formula f_2 = sqrt(T2/T1) * f_1. The hint provided indicates that the fractional change in tension can be expressed as δT/T = 2 * δf/f, guiding the calculation of tension adjustments.
Lakers08
Messages
7
Reaction score
0
Two identical violin strings, when in tune and stretched with the same tension, have a fundamental frequency of 440.0 Hz. One of the strings is retuned by adjusting its tension. When this is done, 1.5 beats per second are heard when both strings are plucked simultaneously.

-What is the highest possible fundamental frequency of the retuned string?
-What is the lowest possible fundamental frequency of the retuned string?
-By what fractional amount was the string tension changed if it was increased?
-By what fractional amount was the string tension changed if it was decreased?

please help me get started I am totally stomped, thanks
 
Physics news on Phys.org
HINT: The beat frequency is the difference between the two frequencies.
 
thanks a lot, lol for some reason i had the equation with a plus sign, thanks for the hint if it wasent for you i would be stuck here all night.
 
ummm just ran into another problem in this question, for the third part "by what fractional amount was the string changed?"

Iam using that the fundamental frequency of a string is proporional to the velocity of the waves which is proportional to the square root of the Tension in the string:

for example : f_2 = sqrt(T2/T1)*f_1

I am plugging in the frequency that i got for part a? for example 440 will go on f_1 and 442 will go on f_2 and then i solve for the ratio of T2/T1 but somehow I am missing something or I am doing this wrong, someone please help
 
HINT:

\frac {\delta T}{T} = 2 \frac {\delta f}{f}
 
thanks a lot
 
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Trying to understand the logic behind adding vectors with an angle between them'
My initial calculation was to subtract V1 from V2 to show that from the perspective of the second aircraft the first one is -300km/h. So i checked with ChatGPT and it said I cant just subtract them because I have an angle between them. So I dont understand the reasoning of it. Like why should a velocity be dependent on an angle? I was thinking about how it would look like if the planes where parallel to each other, and then how it look like if one is turning away and I dont see it. Since...
Back
Top