Solving Work Done in Pushing Sled Up Snowy Incline

  • Thread starter Thread starter foxproff
  • Start date Start date
  • Tags Tags
    Work
AI Thread Summary
The problem involves calculating the work done by a father pushing a sled up a 15-degree incline with constant velocity. The forces acting on the sled include kinetic friction and gravitational force, resulting in a total force of 154.9N required to move the sled. Using the work formula, the work done is calculated as 154.9N multiplied by the distance of 13.9m, yielding a total of 2153J. The incline's height is noted to be 3.6m, confirming the sled's movement against gravity. The solution effectively demonstrates the application of physics principles in calculating work done on an incline.
foxproff
Messages
5
Reaction score
0

Homework Statement



A father pushes horizontally on his daughter’s sled to move it up a snowy incline, If the sled moves up the hill with a constant velocity, how much work is done by the father in moving it from the bottom to the top of the hill? (angle of incline is 15 degrees
F + f(k) + mg = 0
F= -f(k)-mg
= -(-66.2N) - (-88.7N)
= 66.2N + 88.7N
= 154.9N

Work, w=fd
=154.9N * 13.9m
2153J




Homework Equations

work = force,f * Distance, d



The Attempt at a Solution



F + f(k) + mg = 0
F= -f(k)-mg
= -(-66.2N) - (-88.7N)
= 66.2N + 88.7N
= 154.9N

Work, w=fd
=154.9N * 13.9m
2153J
 
Physics news on Phys.org
foxproff said:
A father pushes horizontally on his daughter’s sled to move it up a snowy incline, If the sled moves up the hill with a constant velocity, how much work is done by the father in moving it from the bottom to the top of the hill? (angle of incline is 15 degrees

Is that the entire question?
 
yes
the plane makes an angle of 15 degrees with the horizontal
it has a height of 3.6m from the ground
thanks
 
Thread 'Struggling to make relation between elastic force and height'
Hello guys this is what I tried so far. I used the UTS to calculate the force it needs when the rope tears. My idea was to make a relationship/ function that would give me the force depending on height. Yeah i couldnt find a way to solve it. I also thought about how I could use hooks law (how it was given to me in my script) with the thought of instead of having two part of a rope id have one singular rope from the middle to the top where I could find the difference in height. But the...
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Back
Top