Standing Waves on a string & pipe

AI Thread Summary
A 40.0 cm string with a mass of 8.50 g and tension of 425 N vibrates in its third overtone, causing a nearby pipe to resonate in its third harmonic. The velocity of the string is calculated to be 141.3 m/s, leading to a frequency of 706.5 Hz for the string. The pipe's length is determined to be 0.730 m, based on the relationship between the frequencies of the string and pipe. The fundamental frequency of the pipe is calculated to be 236 Hz. The discussion highlights the resonance between the string and pipe frequencies.
murrskeez
Messages
13
Reaction score
0

Homework Statement



A string 40.0cm long of mass 8.50g is fixed at both ends and is under a tension of 425N. When the string is vibrating in its third overtone, you observe that it causes a nearby pipe, open at both ends, to resonate in its third harmonic. The speed of sound is 344m/s. a) How long is the pipe? b) What is the fundamental frequency of the pipe?

Homework Equations



Fn=(nV)/(2L)
λn=(2L)/n
V=√(F/μ) where μ=m/L

The Attempt at a Solution



Really stuck on this one. I know I can find the velocity of the string with the given information but am not sure how I can relate the velocity of the string to the velocity of the pipe. Any suggestions would be much appreciated.

m/L= 0.0085kg/0.400m = 0.0213kg/m
Vstring=√(425N/0.0213kg/m) = 141.3m/s
 
Physics news on Phys.org
What's the frequency of the vibrating string?
 
So the third overtone would mean n=4...

so fn=(4*141.3m/s)/(2*0.400m) = 706.5Hz

so the frequencies of the string and pipe must be related, I'm just not sure how.
 
murrskeez said:
So the third overtone would mean n=4...

so fn=(4*141.3m/s)/(2*0.400m) = 706.5Hz
Good.
so the frequencies of the string and pipe must be related, I'm just not sure how.
They are the same! (They resonate.) So what's the fundamental frequency of the pipe?
 
I think I get it :smile:

fpipe = nV/2L
706.5Hz = (3*344m/s)/(2L)
L = 0.730m

fo = v/2L
fo = (344m/s)/(2*0.730m)
fo = 236Hz

thank you so much, really appreciate it :)
 
Good! :approve:
 
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Struggling to make relation between elastic force and height'
Hello guys this is what I tried so far. I used the UTS to calculate the force it needs when the rope tears. My idea was to make a relationship/ function that would give me the force depending on height. Yeah i couldnt find a way to solve it. I also thought about how I could use hooks law (how it was given to me in my script) with the thought of instead of having two part of a rope id have one singular rope from the middle to the top where I could find the difference in height. But the...
Back
Top