Statics-Two wires holding traffic light

  • Thread starter Thread starter lrp3395
  • Start date Start date
  • Tags Tags
    Light Wires
AI Thread Summary
The discussion focuses on calculating the tension in two wires supporting a 33 kg traffic light, with angles of 53° and 37° for the respective wires. The correct weight of the light is established as 323 N, using the gravitational constant of 9.8 m/s². Through various equations, the tensions in the left and right wires are determined to be approximately 230 N and 180 N, respectively. A participant acknowledges an earlier miscalculation regarding the weight used in their equations. The final calculations confirm that the tensions are consistent with the forces acting on the system.
lrp3395
Messages
4
Reaction score
0
Screen Shot 2011-11-19 at 8.48.14 PM.png


I don't know what i did wrong

Find the tension in the two wires supporting the traffic light
Mass of light= 33 kg
θ of FT1= 53°
θ of FT2=37°

Ʃfx=0
Ft1cos53-ft2cos37=0
ft1cos53=ft2cos37

Ʃfy=mg
ft1sin53-ft2sin37=mg
ft1sin53=mg+ft2sin37
ft1=(ft2sin37+mg)/sin53
ft1=1.33ft2

1.33ft2=(ft2sin37+mg)/sin53
1.33ft2=.72ft2+mg
.61ft2=323.73 N
Ft2=530.7n

ft1cos53=ft2cos37
ft1cos53=423.84n
ft1=704.26n
 
Physics news on Phys.org
Tension forces always pull away from the objects on which they act. In the horizontal direction, your equation is correct. Not so in the vertical direction.
 
This is what I got:
TLsin(53o) + TRsin(37o) - 294 N= 0 TRcos(37o) - TLcos(53o) = 0
TR = TLcos(53o)/cos(37o)

TLsin(53o) + TRsin(37o) - 294N= 0
TLsin(53o) + {TLcos(53o)/cos(37o)}sin(37o) - 294 = 0
TLsin(53o) + TLcos(53o)tan(37o) = 294N
TL(sin(53o) + cos(53o)tan(37o)) = 294N
TL = (294 N)/(sin(53o) + cos(53o)tan(37o)) = 234.79884N = 230N

TR = TLcos(53o)/cos(37o)
TR = (234.79884 N)cos(53o)/cos(37o) = 176.9336 N = 180N

Left wire has 230N of tension
Right wire has 180N of tension
 
I don't know where you got the 294N from? 33kg * 9.8 = 323N. g is 9.8, not 8.9!

Your maths seems right though.

You can check your answer easily also. 230sin(53) + 180sin(37) = 292N, which is close enough (since you rounded your answers) to 294.
 
Well dangit... I guess I got that one wrong then!
 
PhantomJay is correct

jzCpx.jpg


Hope this helps.
 
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Struggling to make relation between elastic force and height'
Hello guys this is what I tried so far. I used the UTS to calculate the force it needs when the rope tears. My idea was to make a relationship/ function that would give me the force depending on height. Yeah i couldnt find a way to solve it. I also thought about how I could use hooks law (how it was given to me in my script) with the thought of instead of having two part of a rope id have one singular rope from the middle to the top where I could find the difference in height. But the...
Back
Top