Two masses, frictionless pulley

AI Thread Summary
The discussion focuses on a physics problem involving two masses connected by a string over a frictionless pulley. The primary objective is to use conservation of mechanical energy to determine the speed of the 3.9-kg mass just before the 8.7-kg mass hits the ground and the maximum height attained by the 3.9-kg mass. Participants emphasize the importance of accounting for both kinetic and potential energy for each mass in the equations. The solution involves simplifying the energy conservation equation by recognizing that both masses have the same final velocity due to their connection. The final steps require algebraic manipulation to find the desired values for speed and height.
cassienoelle
Messages
63
Reaction score
0

Homework Statement


Two masses are connected by a light string that goes over a light, frictionless pulley, as shown in the figure. The 8.7-kg mass m1 is released and falls through a vertical distance of h = 1.09 m before hitting the ground. Use conservation of mechanical energy to determine:
*picture attached*

a) how fast the 3.9-kg mass m2 is moving just before the 8.7-kg mass hits the ground; and
b) the maximum height attained by the 3.9-kg mass.



Homework Equations





The Attempt at a Solution

 

Attachments

  • 84b257235efec188243b3de648ddec440256f024bc927fa5d01e0d019a4d3abcaf0c2311e181d84806bf7496ccf632d3.png
    84b257235efec188243b3de648ddec440256f024bc927fa5d01e0d019a4d3abcaf0c2311e181d84806bf7496ccf632d3.png
    7.9 KB · Views: 1,258
Physics news on Phys.org
So what exactly are you having trouble with? If you haven't tried to solve the problem or you don't tell us where you're stuck, you won't get much help.

What are the relevant equations for conservation of energy problems?
 
i'm stuck. period.
i have NO idea where to even start.
 
Okay so:
MEi = MEf
m1=8.7 hi=1.09 hf = 0
m2 = 3.9 hi = 0 hf = ?
KEi + PEi = KEf + PEf
1/2mv^2 + mgh = 1/2mv^2 + mgh
(1/2)(m??1 or 2??) V^2 + m?g0 = 1/2 m? 0 + mgh
 
cassienoelle said:
Okay so:
MEi = MEf
m1=8.7 hi=1.09 hf = 0
m2 = 3.9 hi = 0 hf = ?
KEi + PEi = KEf + PEf
1/2mv^2 + mgh = 1/2mv^2 + mgh
(1/2)(m??1 or 2??) V^2 + m?g0 = 1/2 m? 0 + mgh

Yeah you're on the right path. Just remember that you have two masses, so you need KE and PE for both masses, before and after (8 terms). If you want to write out the complete equation, it's like this:

(KE of m1 before) + (KE of m2 before) + (PE of m1 before) + (PE of m2 before) = (KE of m1 after) + (KE of m2 after) + (PE of m1 after) + (PE of m2 after)

(1/2)m1*v1i^2 + (1/2)m2*v2i^2 + m1*g*h1i + m2*g*h2i = (1/2)m1*v1f^2 + (1/2)m2*v2f^2 + m1*g*h1f + m2*g*h2f

And like you said, h2i = 0, h1f = 0, and you also have v1i = 0 and v2i = 0 (they both start from rest). Moreover, you know that both velocities are the same since they're connected by a string, so v1f = v2f = V (we'll call both final velocites V). Now your equation reduces to:

m1*g*h1i = (1/2)m1*V^2 + (1/2)m2*V^2 + m2*g*h2f

Now that's not so bad. The rest is algebra, solving for V.

Edit: That does it for part (a). For part (b), simply use the V you got from part (a) as an initial upward velocity against gravity (ignore the other mass and string and everything else).
 
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Struggling to make relation between elastic force and height'
Hello guys this is what I tried so far. I used the UTS to calculate the force it needs when the rope tears. My idea was to make a relationship/ function that would give me the force depending on height. Yeah i couldnt find a way to solve it. I also thought about how I could use hooks law (how it was given to me in my script) with the thought of instead of having two part of a rope id have one singular rope from the middle to the top where I could find the difference in height. But the...
Back
Top