Velocity Time graph question [i'm not getting anywhere]

AI Thread Summary
The discussion revolves around a physics problem involving a car's motion described by a velocity-time graph. The user struggles to accurately sketch the graph and calculate the unknowns related to the car's acceleration and time intervals. Despite initial confusion, they receive guidance to write equations for velocity changes during acceleration phases, which helps clarify the problem. However, they continue to face challenges in determining the values of acceleration and time, specifically needing to find a and t given the total distance of 675m. The key takeaway is that the distance corresponds to the area under the graph, prompting the need to correctly sum the areas to solve for T.
Acidvoodoo
Messages
10
Reaction score
0
"As a car passes point A on a straight road, it's speed is 10m/s, the car moves with constant acceleration, a m/s/s, along the road for T seconds until it reaches point B, where it's speed is Vm/s.
The car travels at this speed for a further 10 seconds, when it reaches the point C. From C it travels for a further T seconds with constant acceleration 3a m/s/s until it reaches a speed of 20 m/s at the point D."

Sketch the [t,v] graph for the motion, and show that V=12.5

ok, this is the first t,v graph I've drawn, so it could be painfully wrong, which may be my first problem, here it is is paint.

anyway, i don't know whether my graph is correcy, and even if it is, i just can't seem to work it out.
tried some trig, trapezium rule, i just feel i have to many unknowns to work this thing out

any push in the right direction is appreciated

alternate link to my graph thingy

http://pics.bbzzdd.com/users/acidvoodoo/physics.JPG

drag and drop into your browser, or copy and paste, to get it to work :)
 

Attachments

  • physics.jpg
    physics.jpg
    6.4 KB · Views: 644
Last edited by a moderator:
Physics news on Phys.org
dunno if attachement worked?

realised that t should really be a T, and those T's equal
 

Attachments

  • physics.jpg
    physics.jpg
    6.4 KB · Views: 652
Last edited:
Originally posted by Acidvoodoo
...
anyway, i don't know whether my graph is correcy, and even if it is, i just can't seem to work it out.
tried some trig, trapezium rule, i just feel i have to many unknowns to work this thing out
Your graph looks fine. Now write down equations describing how the velocity changes during the accelerated periods. (Use v_f=v_i+a\Delta t.) Even though there are three unknowns (a, t, v), if you write down the two equations, you will see that you can easily solve for v.
 
thanks very muchfor that tip, i worked it out now, very simple in the end :(

but the next part says "the distance from A to D is 675m, find a and t" [from earlier.

the answers are a=1/8 and t=20. i just can't get to these answers, I've tried writing what i know [s, u, v] and trying to work that out, but it doesn't work. also tried taking away the middle section which is 25m, from 675 to get 650, and then dividing that by a ratio of 3:1, as there is a and a 3a , basicly just aimless ideas trying to get to the answers, but I've gone wrong. one more try was to write out the forumlas for the sqaures and triangles areas and making them equal 675, then solving for t, but that didn't work.

any ideas for this one?
 
Originally posted by Acidvoodoo
any ideas for this one?
You must be making an error somewhere. The distance equals the area under the graph. Just add up the pieces and solve for T. (The middle section does not equal 25m.)
 
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Trying to understand the logic behind adding vectors with an angle between them'
My initial calculation was to subtract V1 from V2 to show that from the perspective of the second aircraft the first one is -300km/h. So i checked with ChatGPT and it said I cant just subtract them because I have an angle between them. So I dont understand the reasoning of it. Like why should a velocity be dependent on an angle? I was thinking about how it would look like if the planes where parallel to each other, and then how it look like if one is turning away and I dont see it. Since...
Back
Top