Vertical and horizontal components,physics As level help :(

AI Thread Summary
The discussion focuses on solving specific physics problems from a June 2016 exam, particularly questions 15 and 16. For question 15, the approach involves using free body diagrams (FBDs) to establish equilibrium equations, with tension formulas applied to both the fly and the spider. In question 16, the relationship between tension and angle is crucial, as the horizontal components of tension affect the forces acting on the poles. Participants emphasize the importance of eliminating variables to find acceleration and understanding how changes in angle impact the system. Overall, the conversation provides insights into applying fundamental physics concepts to solve the problems effectively.
Maryam9
Messages
3
Reaction score
0

Homework Statement


This is paper from june 2016 , the link below;
http://qualifications.pearson.com/c...2013/Exam materials/WPH01_01_que_20160524.pdf
Can someone pleeeeeze explain how to solve question 15 part B AND queation 16 part B .
I have an exam tmrw so please please if someone could explain this to me :cry:

Homework Equations


How do write the answer in part b of Q16
How to solve the question?[/B]

The Attempt at a Solution


for question 15 I tried using the tension formula T=mg+ma but don't know how to subtitue quantities in it
for question 16 I don't understand what the question is asking about angles , all I could understand that forces cancel out now if its right or no idk but idk how to write the answer :(
 
Physics news on Phys.org
Hi Maryam, :welcome:

At the risk of being severely punished by our good mentors (answering is forbidden in PF, we are only allowed to help according to the rules ) - but heck, damsels in distress...

For 15a you may assume the whole lot is just hanging: no acceleration. There's only one fundamental difference between the fly FBD and that for the spider: there is a T1 pulling down. Once you have the FBDs you also have the equations for equilibrium (= hanging still).
Quantities are the givens (all in the form of symbols).

But you appear to ask about 15b: They give T1 and you will need to solve TWO equations of the type T=mg+ma : one for the fly and one for the spider. Look at the FBDs and write them down (in terms of the symbols).

For 16: You solved a) ? For b) you could look at T as a function of ##\theta## Or you could look at the horizontal component T##\sin\theta## because that is what is pulling the pole tips towards each other.
 
BvU said:
Hi Maryam, :welcome:

At the risk of being severely punished by our good mentors (answering is forbidden in PF, we are only allowed to help according to the rules ) - but heck, damsels in distress...

For 15a you may assume the whole lot is just hanging: no acceleration. There's only one fundamental difference between the fly FBD and that for the spider: there is a T1 pulling down. Once you have the FBDs you also have the equations for equilibrium (= hanging still).
Quantities are the givens (all in the form of symbols).

But you appear to ask about 15b: They give T1 and you will need to solve TWO equations of the type T=mg+ma : one for the fly and one for the spider. Look at the FBDs and write them down (in terms of the symbols).

For 16: You solved a) ? For b) you could look at T as a function of ##\theta## Or you could look at the horizontal component T##\sin\theta## because that is what is pulling the pole tips towards each other.
Aww thanks !:-p
What does FBD mean ?? And in question 15 they asked for the acceleration not tension , How do I get that?? :frown:
And question 16 I was asking about part b , Idk how to write the answer because I don't understand it
 
Free body diagram

T2 - mflyg = ma for the fly
T1 - T2 - mspiderg = ma for the spider.

a is the same for both (The distance between them does not change). Eliminate T2 and there you are !

16: if ##\theta## increases, the horizontal components of T decrease, so the poles are not pulled together so hard any more. The vertical components remain the same.
 
BvU said:
Free body diagram

T2 - mflyg = ma for the fly
T1 - T2 - mspiderg = ma for the spider.

a is the same for both (The distance between them does not change). Eliminate T2 and there you are !

16: if ##\theta## increases, the horizontal components of T decrease, so the poles are not pulled together so hard any more. The vertical components remain the same.
ooh! ok Thank u so much :) :dademyday:
 
You're welcome. Good luck with the test.
 
  • Like
Likes Maryam9
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Correct statement about a reservoir with an outlet pipe'
The answer to this question is statements (ii) and (iv) are correct. (i) This is FALSE because the speed of water in the tap is greater than speed at the water surface (ii) I don't even understand this statement. What does the "seal" part have to do with water flowing out? Won't the water still flow out through the tap until the tank is empty whether the reservoir is sealed or not? (iii) In my opinion, this statement would be correct. Increasing the gravitational potential energy of the...
Back
Top