Vibration Problem with Fixed End Beam and Unbalanced Motor | Homework Help

  • Thread starter Thread starter bikramjit das
  • Start date Start date
  • Tags Tags
    Vibration
AI Thread Summary
The discussion revolves around a fixed-end beam with an unbalanced motor causing vibrations that match the motor's rotational speed. When the motor operates at 120-150 rpm, a mass placed on the beam loses contact and "dances" due to these vibrations. Participants clarify that the motor speed corresponds to the frequency of the beam's vibration, specifically referring to angular speed. The problem requires determining the amplitude of vibration at both 120 rpm and 150 rpm, as well as calculating the system's natural frequency. The urgency for assistance highlights the complexity of finding the natural frequency in this base excitation scenario.
bikramjit das
Messages
12
Reaction score
0
vibration problem!

Homework Statement



Question:There is a fixed end beam PQ. It is carrying a motor M. The motor is unbalanced and when the motor is rotating ,it is making the beam to vibrate with a frequency equal to the speed of the motor. A small mass is kept at point A just above the motor on the beam. it also goes up & down along with the beam . When the motor speed is 120 - 150rpm, the object at A is loosing contact with the beam & is actually dancing on the beam. Determine the amplitude of vibration when the speed of motor is 120 rpm and when 150 rpm . Then calculate the natural frequency of the system.

|---------------------M--------------------|

data may be suitably assumed.


Homework Equations



can't get any of them

The Attempt at a Solution



This is a base excitation problem. but the natural frequency is diff. to find. pls help
 

Attachments

  • Untitled.png
    Untitled.png
    1.1 KB · Views: 406
Last edited:
Physics news on Phys.org


bikramjit das said:
The motor is unbalanced and when the motor is rotating ,it is making the beam to vibrate with a frequency equal to the speed of the motor

which speed are we talking about here?
 


@cupid: u can assume the speed of motor as N. This is equal to the frequency of vibration of beam (base).
 


i mean ... are we talking about angular speed?
 


yeah, angular speed...pls solve it quickly, grave need
 


heyy...some one help me out with this question
 
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Struggling to make relation between elastic force and height'
Hello guys this is what I tried so far. I used the UTS to calculate the force it needs when the rope tears. My idea was to make a relationship/ function that would give me the force depending on height. Yeah i couldnt find a way to solve it. I also thought about how I could use hooks law (how it was given to me in my script) with the thought of instead of having two part of a rope id have one singular rope from the middle to the top where I could find the difference in height. But the...
Back
Top