What Are the Key Concepts of Dipole Antenna Radiation?

AI Thread Summary
Dipole antennas exhibit both near and far fields, with the near field containing reactive elements that do not fully cancel out even at resonance. While an ideal antenna appears purely resistive at resonance, it still possesses reactive components that store energy in electric and magnetic fields. An antenna functions as a transformer, converting guided waves to free-space waves, which involves impedance matching to minimize energy reflection. Poor impedance matching leads to energy being reflected back and trapped in the near field, resulting in inefficiencies. Understanding these concepts is crucial for optimizing antenna performance and maximizing transmitted power.
Wannabeagenius
Messages
90
Reaction score
0
Hi All,

I'm currently wrestling with trying to understand the theory behind radiation from a dipole antenna. Little by little I'm putting the pieces together but I need verification regarding a conclusion that I have drawn although I have not read it.

An antenna has a near field and a far field. The near field is due to the fact that all practical antennas have reactive elements even at resonance which do not completely cancel out. The far field is due to resonance and in a perfect world with no reactance, the transmission line to an antenna at resonance would see only a pure resistor with no reactive components.

Am I correct so far? If so, is it fair to say that an ideal antenna operating at resonance with no reactive component would not have a near or inductive field?

In trying to tackle this issue, I am probably going to be asking further questions one at a time at they come up.

Thank you,

Bob
 
Physics news on Phys.org
I think this is close but not quite. On resonance the antenna looks resistive from the terminals, but that doesn't mean it lacks reactive components. An analogy might help: even though an LCR tank circuit is purely resistive at resonance, energy is stored alternately in the L and C parts. In fact, that stored energy is maximal and it decreases away from resonance. In the antenna, capacitive and inductive reactance similarly balance and cancel at resonance at the terminals, but substantial energy is still stored in the electric and magnetic fields in the near field. This happens regardless of how ideal the antenna is.
 
marcusl said:
I think this is close but not quite. On resonance the antenna looks resistive from the terminals, but that doesn't mean it lacks reactive components. An analogy might help: even though an LCR tank circuit is purely resistive at resonance, energy is stored alternately in the L and C parts. In fact, that stored energy is maximal and it decreases away from resonance. In the antenna, capacitive and inductive reactance similarly balance and cancel at resonance at the terminals, but substantial energy is still stored in the electric and magnetic fields in the near field. This happens regardless of how ideal the antenna is.

I would also add that one of the simplest definitions that I have come across for an antenna is that an antenna is a transformer that changes a guided wave into a free-space propagating wave and vice-versa. In this manner, an antenna acts as an impedance transformer, trying to change the guided wave in a waveguide of an impedance of X ohms to the free wave in a medium of 377 ohms (if free space). There is a little more to it than just an impedance transformer since we are going from guided to propagating but it gives a way of imagining how the antenna behaves. A poor antenna will provide a bad impedance matching, causing energy to be reflected back to the generator in the waveguide and back off the antenna in free space. Any reactive properties (not necessarily from reactive elements but from physical characterstics that give rise to reactive behavior) will cause energy to be trapped and deemed useless. As marcus states, since we do not necessarily have a physical reactive circuit element, the energy gets trapped in the near-fields around the antenna. They are caught between the guided wave and propagating wave modes. Since any antenna will have these reactive properties, we have to provide a suitable matching circuit to maximize the transmitted power and while this removes any net reactive impedeance it does not prevent a portion of the energy from being trapped as reactive power.
 
Consider an extremely long and perfectly calibrated scale. A car with a mass of 1000 kg is placed on it, and the scale registers this weight accurately. Now, suppose the car begins to move, reaching very high speeds. Neglecting air resistance and rolling friction, if the car attains, for example, a velocity of 500 km/h, will the scale still indicate a weight corresponding to 1000 kg, or will the measured value decrease as a result of the motion? In a second scenario, imagine a person with a...
Dear all, in an encounter of an infamous claim by Gerlich and Tscheuschner that the Greenhouse effect is inconsistent with the 2nd law of thermodynamics I came to a simple thought experiment which I wanted to share with you to check my understanding and brush up my knowledge. The thought experiment I tried to calculate through is as follows. I have a sphere (1) with radius ##r##, acting like a black body at a temperature of exactly ##T_1 = 500 K##. With Stefan-Boltzmann you can calculate...
Thread 'Griffith, Electrodynamics, 4th Edition, Example 4.8. (First part)'
I am reading the Griffith, Electrodynamics book, 4th edition, Example 4.8 and stuck at some statements. It's little bit confused. > Example 4.8. Suppose the entire region below the plane ##z=0## in Fig. 4.28 is filled with uniform linear dielectric material of susceptibility ##\chi_e##. Calculate the force on a point charge ##q## situated a distance ##d## above the origin. Solution : The surface bound charge on the ##xy## plane is of opposite sign to ##q##, so the force will be...
Back
Top