What is the Force on a Wall from a Horizontal Water Jet?

AI Thread Summary
The discussion revolves around calculating the force exerted on a vertical wall by a horizontal water jet. The water jet has a velocity of 20 m/s and a cross-sectional area of 5 x 10^-4 m^2, with water density at 1000 kg/m^3. To find the force on the wall, the rate of change of momentum must be determined, considering the water is brought to rest upon impact. Participants are encouraged to clarify their understanding of the problem and share their calculations for part a to assist with part b. The conversation highlights the importance of grasping the theoretical aspects of momentum and force in fluid dynamics.
gidra
Messages
4
Reaction score
0
It's my first time writing on this forum, hope I'm posting in the correct section.

Problem :

A hose directs a horizontal jet of water on to a vertical wall.

What is the force on the wall, under the above conditions ? Explain.

Thanks for any replies
 
Physics news on Phys.org
Please post the complete problem exactly as it was given.
 
A hose directs a horizontal jet of water, moving with a velocity of 20ms^-1, on to a vertical wall. The cross-sectional area of the jet is 5 x 10^-4 m^2. If the density of water is 1000kg m^-3:

a) fin the rate of change of momentum as the water hits the wall, assuming that the water is brought to rest there;

b) what is the force on the wall, under the above conditions? Explain
 
That's better. Hints for a: How much water hits the wall every second? What's its momentum just before it hits the wall? What's its momentum just after hitting the wall? What's the change in momentum?
 
I worked out part a, I'm stuck with the theoratic part now. Can't really understand the question. Thanks for your replies btw
 
I'm not sure I understand. You completed part a? And you're stuck on part b?
 
Thread 'Voltmeter readings for this circuit with switches'

Thread 'Voltmeter readings for this circuit with switches'

TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
View full post »
Thread 'Struggling to make relation between elastic force and height'

Thread 'Struggling to make relation between elastic force and height'

Hello guys this is what I tried so far. I used the UTS to calculate the force it needs when the rope tears. My idea was to make a relationship/ function that would give me the force depending on height. Yeah i couldnt find a way to solve it. I also thought about how I could use hooks law (how it was given to me in my script) with the thought of instead of having two part of a rope id have one singular rope from the middle to the top where I could find the difference in height. But the...
View full post »

Similar threads

Drone dragging a hose behind it
Replies
24
Views
1K
Force exerted by a deflecting water jet
Replies
14
Views
2K
Maximum height for water from a fire hose
Replies
4
Views
4K
I Filling a pool with the hose end above or in the water
Replies
11
Views
3K
Solve Parabolic Motion Problem: Jet of Water from Fire Hose
Replies
4
Views
2K
Which Force is Represented by the Gradient of the Ball-Wall Collision Graph?
Replies
3
Views
4K
Maximum height water can be projected onto a wall
Replies
3
Views
4K
Calculating the Normal Force on an Inclined Flat Plate Struck by a Jet of Water
Replies
6
Views
2K
Calculating Horizontal Forces in a Stream of Sand Impacting a Wall
Replies
2
Views
8K
Estimating the force exerted by a water jet on a flat plate - Bernoulli vs Momentum Equation
Replies
11
Views
3K

Hot Threads

Recent Insights

Back
Top