What is the work done by a horse pulling a cart?

AI Thread Summary
The discussion focuses on calculating the work done by a horse pulling a cart, with participants comparing their solutions. The author initially provided a value of 332,190 Joules, while another participant calculated 355,940 Joules, attributing the difference to conversion issues and a miscalculation of the weight from 45 lb to 42 lb. After correcting for the weight, the recalculated work done is approximately 332,210 Joules, highlighting a minor discrepancy of 0.04%. The conversation emphasizes the importance of accurate unit conversions and the potential for small errors to significantly impact results. Overall, the discussion underscores the need for careful attention to detail in physics calculations.
walking
Messages
73
Reaction score
8
Zw2V3.png

The answers for author's solution differ slightly from mine when I convert his answers to SI. I think this is only a conversion issue as the differences are small but I wanted to confirm if my solution is correct:

d=rt (distance = rate x time) so (12 min)(6.2mi/h)(60s/1min)(0.3048m/s)(0.6816mi/h). Then $$W=(F\cos \theta)d=(45lb\cos 27)d$$ etc. I end up getting 355940J wjereas author gets 332190J (he doesn't give answer in J since he works with feet, but after converting it to J using accurate conversion rates this is what I got).
 
Physics news on Phys.org
I got 244,921 lb*ft which converts to 332,068 Joules. My answer differs from the author's by 0.04%. Yours differs by 7.1%. It looks like it's more accurate to work with feet and do one final conversion in the end.

What did you get for part (b)?
 
It doesn't say 45 lb, it says 42 lb.

356 or 332 is too far off for conversion accuracy

Your
(12 min)(6.2mi/h)(60s/1min)(0.3048m/s)(0.6816mi/h)
has the wrong dimension.
What is (0.3048 m/s)(0.6816 mph) ?

I get 332.1904 kW ##\qquad##:smile:

Note that providing more than two digits is questionable: it suggests more accuracy than actually justified
1615398443427.png


##\ ##
 
BvU said:
It doesn't say 45 lb, it says 42 lb.
And the discrepancy between 45 and 42 is 7.1%. I didn't notice the mistaken input.
 
Right, so I made the mistake of using 45lb instead of 42. When I use 42 I get $$(42lb\cos 27)(12min)(6.2mi/h)\left( \frac{10^{-5}N}{2.248\times 10^{-6}lb}\right)\left(\frac{60s}{1min}\right)\left(\frac{0.3048m/s}{0.6818mi/h}\right)=332210=3.32\times 10^5 J$$
 
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Correct statement about a reservoir with an outlet pipe'
The answer to this question is statements (ii) and (iv) are correct. (i) This is FALSE because the speed of water in the tap is greater than speed at the water surface (ii) I don't even understand this statement. What does the "seal" part have to do with water flowing out? Won't the water still flow out through the tap until the tank is empty whether the reservoir is sealed or not? (iii) In my opinion, this statement would be correct. Increasing the gravitational potential energy of the...
Back
Top