What velocity does the particle need to get to point B?

AI Thread Summary
To determine the velocity a particle needs to reach point B, the discussion focuses on breaking the problem into x and y components. The y component involves using the formula with acceleration as sin(a)*9.82, while the x component uses the equation x=V0*t, substituting time from the y calculation. Participants confirm that the approach is correct but caution against substituting numerical values for g without knowing other variables. Additionally, there is a suggestion to clarify the angle notation to avoid confusion in the algebra. Overall, the method discussed is valid, with emphasis on maintaining clarity in variable representation.
ClearWhey
Messages
19
Reaction score
4
Homework Statement
A particle is at point A in a certain moment. The particle rolls with an angle of inclination a. It’s velocity direction is parallel to the upper edge. What velocity V0 does it need to reach into the hole B?

Sorry for my english
Relevant Equations
Look at the picture to get a better idea of the problem.
It was a long time ago I did these kind of problems so I’m a bit rusty. The only thing I can think of is divide it up to two parts one x and one y.

In y the acceleration is sin(a)*9.82? Then put that in the equation and solve for t.

In x the there is no acceleration so the formula is x=V0*t, I put in t from y and solve for V0?

Haven’t gotten the answer paper yet so I have no idea if I’m on the right path or wrong. That is why I’m asking here if I’m solving this question right, if not how should I do it?

Thanks in advance for the help!
71EDAA2E-1DA0-4245-9624-950298303FA5.jpeg
 
Physics news on Phys.org
Looks like the right approach.
 
  • Like
Likes ClearWhey
You have given the inclination angle as ##a## and according to the figure the "horizontal" distance between A and B also labelled as ##a##. This might lead to confusing algebra.

Perhaps you meant to use ##\alpha## as the angle?
 
  • Like
Likes ClearWhey
gneill said:
You have given the inclination angle as ##a## and according to the figure the "horizontal" distance between A and B also labelled as ##a##. This might lead to confusing algebra.

Perhaps you meant to use ##\alpha## as the angle?

Yes you are correct.

haruspex said:
Looks like the right approach.

What do you think about my solution?
4382B696-6109-4DF2-B5B3-BEE9211F2C16.jpeg
 
ClearWhey said:
What do you think about my solution?
That is right, but there is no point in substituting a numerical value for g when you don't have numbers for the rest of the variables. Just leave it as g.
And if you do substitute a numerical value you must include the units: ##v_0=a\sqrt{\frac{9.82\sin(\alpha)ms^{-2}}{2b}}##
 
  • Like
Likes ClearWhey and etotheipi
haruspex said:
That is right, but there is no point in substituting a numerical value for g when you don't have numbers for the rest of the variables. Just leave it as g.
And if you do substitute a numerical value you must include the units: ##v_0=a\sqrt{\frac{9.82\sin(\alpha)ms^{-2}}{2b}}##

Alright will keep that in mind for the future and thanks for the help!
 
  • Like
Likes jim mcnamara
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Struggling to make relation between elastic force and height'
Hello guys this is what I tried so far. I used the UTS to calculate the force it needs when the rope tears. My idea was to make a relationship/ function that would give me the force depending on height. Yeah i couldnt find a way to solve it. I also thought about how I could use hooks law (how it was given to me in my script) with the thought of instead of having two part of a rope id have one singular rope from the middle to the top where I could find the difference in height. But the...
Back
Top