A diagram is a symbolic representation of information using visualization techniques. Diagrams have been used since ancient times on walls of caves, but became more prevalent during the Enlightenment. Sometimes, the technique uses a three-dimensional visualization which is then projected onto a two-dimensional surface. The word graph is sometimes used as a synonym for diagram.
Homework Statement
The entering class in an engineering college has 34% who intend to major in mechanical engineering, 33% who indicate an interest in taking advanced math as part of their major field of study, and 28% who intend to major in electrical engineering, while 23% have other...
[PLAIN]http://img20.imageshack.us/img20/4083/minkowskidiagram1.jpg
B is meant to have occurred before C in the S' frame, but I don't get how it's possible.
Homework Statement
Solve for the unknowns.
http://img535.imageshack.us/img535/7494/24800354.png
http://img517.imageshack.us/img517/5765/33984576.png
[PLAIN][PLAIN]http://img707.imageshack.us/img707/2511/75290122.png
[PLAIN][PLAIN]http://img96.imageshack.us/img96/2593/40824092.png...
Homework Statement
http://www.maths.ox.ac.uk/system/files/private/active/0/b07.2_c7.209.pdf
Q1
(Also in Q2, what is the definition of 4 momentum for a massless particle?)
The Attempt at a Solution
I can do the entire question if I first derive the Lorentz transformation but I...
Hey all, here is a simple problem provided as a review for our final by my professor. I think I have everything right, but if history offers any insight into the future, I'm dead wrong.
Any help is greatly appreciated.Homework Statement
A 30kg box sits on a 10kg wagon. the wagon is pulled by...
Homework Statement
This is a review problem i was given for my final exam tommorow, I am stuck on 1 problem, even with the answer key I am not understanding it.(also sorry but the picture won't copy from MSword, but its a cylinder rolling up a hill)
(B) When the lander hits the surface...
Homework Statement
I need to draw carefully labelled spacetime diagrams (one per section) to illustrate the following:
a) The length of a 'rod' which is exactly 1.0 light seconds long when at rest along the x′-axis in one frame, and which is moving along the x-axis at 0.866c in the...
Homework Statement
I need to draw a series of Feynman diagrams to show some processes, but I'm unsure if I'm doing these correctly. I've put them together in this one post and detailed each below in turn, hopefully this is going to make sense. I know there's a few, but I want to make sure I'm...
I'm learning how to do Feynman diagrams for an exam coming up, and have come across diagrams in both position and momentum space. If I'm asked to draw a Feynman diagram without specifying which kind, is it generally assumed that it's in position space? If I label the the incoming and outgoing...
Homework Statement
draw a circuit diagram for a single circuit with the following conditions:
a. resistor one is in series with resistor 2 and 3
b. resistor 2 and 3 are in parallel with each other
c. capacitor one is in series with resistor 1
d. a voltmeter is used to measure the...
I have a two point Green's Function with a phi^4 interacting Hamiltonian and am considering the second order of pertubation, and must work out the following:
T[\phi(x_1) \phi(x_2) \phi(y_1)^4 \phi(y_2)^4] = T[\phi(x_1) \phi(x_2) \phi(y_1) \phi(y_1) \phi(y_1) \phi(y_1) \phi(y_2) \phi(y_2)...
I have spent a while trying to get to grips with the building blocks used for constructing feynman diagrams, below is my attempt at a set of reactions, how am I doing so far?
I don't think e^{+}e^{-}\rightarrow\mu^{+}\mu^{-} can happen since a gluon only interacts on particles with a...
Hello there ,
I don't know how to draw free body diagrams ,
so can u illustrate to me how to draw an FBD for an object sliding down a ramp like this one.
http://ffden-2.phys.uaf.edu/211_fall2004.web.dir/Jeff_Levison/freebody_diagram.jpg
illustrate this in details , please
Thanks
Homework Statement In a series circuit V = V<0 @50hz with an R and C, show that the graph of the loci or the port impedance, Z, and port admittance, Y, as the resistance R is varied from 0 to inf ohms are as shown.
http://ivila.net/prob.pnghttp://ivila.net/loci.png
Homework Equations
The...
Suppose you have an question like:
"In the t-x spacetime diagram of O, draw the basis vectors \vec{e}_0 and \vec{e}_1 Draw the corresponding basis vectors of \bar{O} , who moves with speed 0.6 in the positive x direction relative to O. Draw the corresponding basis vectors of...
Homework Statement
Homework Equations
The Attempt at a Solution
I know how to work shear and moment diagram problems, but I am a little confused as to how to start this one. Does it matter that the force is hanging off the bracket? Can I just continue as if the force was acting...
Homework Statement
Draw an argand diagram to represent the follwing property:
real(z) < abs(z) < real(z)+img(z)
Homework Equations
z = x+iy;
real(z) = x
abs(z) = sqrt(x^2 + y^2)
img(z) = y
The Attempt at a Solution
substituting original expression with x, y, and sqrt(x^2 + y^2)...
Homework Statement
A cylinder with a piston contains 0.250 mol of oxygen at 2.40 105 Pa and 355 K. The oxygen may be treated as an ideal gas. The gas first expands isobarically to twice its original volume. It is then compressed isothermally to its original volume, and then it is cooled...
Sorry I am spamming the forum, but I have yet another question on Feynman diagrams -
Please see attached picture.
Apparently the symmetry factor for this FD is 1 - I am trying to understand why.
My notes explain that "the symmetry factor is 1 because:
φ(x1) contracts to φ(y1) in 4 different...
Homework Statement
A box of mass m2=3.5 kg rests on a frictionless horizontal shelf and is attached by strings to bodes of masses m1 = 1.5 kg and m3 = 2.5kg. Both pulleys are frictionless and massless. The system is released from rest. After it is released, find (A) the acceleration of each...
Im very confused when I see schematic diagrams with ground symbols. In my understanding, those ground symbols are placed in the negative connection in the circuit . Can someone explain me what are "grounds" for?
could anyone help me with cnc turning process, diagram of machine. it be better if you can give me manual book about it. i need to learn about cnc from introduction and part of that machine. I'm new in this course.
Homework Statement
Blocks A & B each have mass 5kg, and all contact surfaces are frictionless.
Determine the force F needed to keep the blocks in static equilibrium, and the forces on all contact surfaces.
Homework Equations
I know I need to find where Fx= 0 and where Fy= 0.
The Attempt...
Hello.
I have a concern in relation to ray diagrams. So I read that the first incidence ray I draw must be parallel to the principle axis and be reflected such that it passes through the principle axis.
Ok so this part isn't too much of a worry.
However it states that the second ray must be...
In a question He gives that :
0.1 kg of water contained in cylinder-piston device .
Water is initially at 1.5 bar and 403 k (Kelvin).
More 0.1 kg of water at 2 bar and 403 kelvin is admitted to the cylinder.
Through out this filling process, pressure and temperature of cylinder are...
Homework Statement
A 0.5kg piece of ice(water) at an initial temp of -65 degrees Celsius is placed inside a well-insulated container with 3.0 kg of tea at an initial temp of 20 degrees Celsius, and the two are allowed to come to thermal equilibrium( the tea can be treated as water with respect...
Hi Guy's
I am just starting out in topology and I was wondering if someone might know of a good link that may have venn diagrams of some important topological terms ie closure of A, int A, limit points etc.
regards
Brendan
a motor vehicle has a wheel base of 3m. four posta ramp with two wheels each side. ramps front wheels have 6kn and rear 8kn. determine the reaction of the supports on the beam?
vehicle is raised 2.25 m vertically this is done in 45 seconds calculate power of electric motor required use...
I was plotting the color magnitude diagram of a globular cluster and I noticed something odd. On most H-R diagrams, the turn-off from the main sequence to the giant branch is somewhere between (B-V) magnitude values of about .5-1.0.
On my plot, the turn-off is between about -.4 and -0.1...
Homework Statement
Regarding two-dimensional collisions, I just don't understand why my book suddenly changes vector positions and theta angles at different places than what I was accustomed to. I understand that they're getting me to think by changing questions and answers, but I'm confused...
A help to understand how gravity works in our universe is called an embedding diagram. It is a three-dimensional representation of what happens to a two-dimensional universe in the presence of mass, i.e. the plane is distorted into a 'gravity' pit.
What happens if we extend this concept to...
Homework Statement
Draw a clearly labelled “Minkowski spacetime” diagram illustrating two events
((1) a farmer firing his laser gun at his cow, which is sitting along his positive x-direction, and
(2) the cow dying) as observed by two observers (S at rest in the farmer’s and cow’s frame...
I have some well ordered feyman diagrams which have an incoming neutrino interacting at a vertex with a w boson and emitting an electron. since a neutrino can pass through some 18 light years of led without interacting, I'm wandering how a single neutrino interacts at this vertex?
Roger Penrose is reported to have said:
And I understand that, in Minkowski space-time, the relative velocity between two inertial frames of reference is a rotation of the frames, with respect to one another, about a common origin.
Now in the description of Minkowski diagrams given...
Is this right? To calculate a scattering amplitude for a certain scattering event, you take the term in the wick's expansion of the S-Matrix that suits your situation best. Then you draw a Feynman Diagram that corresponds to the term in the wick's expansion, then just use the Feynman Rules to...
hi everyone,
I want to know how i can draw the schematic diagrams of the circuits.
I understand the therory but i have no idea how you make the circuits
and draw the schematic diagrams of them.
Thanks
What is the difference between a circuit diagram and a wiring diagram.
And while your at it can anyone explain the difference between diagram that routes fibers/ connections to from a battery to a lamp for example as opposed to the alternate... one that routes to the connector on the battery...
if you go down to the section called "do they always exist?" you'll find a venn diagram for 6 sets:
http://www.combinatorics.org/Surveys/ds5/VennWhatEJC.html
would a horizontal cross-section resemble a cantor set, if there were infinitely many sets? it looks like it would vaguely resemble...
Help in mathematical modelling phase diagrams! :(
Mathematical modelling question on predator-prey models
logistic prey-predator model with prey logistic growth
dx/dt= ax - bx^2 -cy
dy/dt= -ey + fxy
ax = growth rate of prey in the absence of predation
-cxy = the death rate per...
Hello
I'm looking for diagrams (Kruskal and Penrose diagrams) representing Minkosky spacetime.
I found two diagrams at http://nrumiano.free.fr/Estars/int_bh.html (the two first diagrams of the page). Do they represent a Minkowski spacetime ?
Thanks,
Jeff
Hi everyone.
So I'm typing up some notes for some high school kids I'm helping with their math (I'm not tutoring them for money, I'm helping them informally). I want to put diagrams in my notes, you know the usual stuff: graphs of the usual functions; explaining concepts in diagrams; geometry...
Hi. The question is:
Draw the shear force and bending moment diagrams for the simply supported beam shown below. State the values of the greatest shear force and bending moment, and the bending moment at D.
The diagram is attached as is my attempt at the answer. I hvae not stated the values of...
I'm confused about how to draw scaled vector diagrams. I have a scale and I can do the first two vectors, but then I get confused.
Let's say my vectors are 10 cm at 0 degrees, 5 cm at 45 degrees, and 11 cm at 212 degrees.
How do I draw this? I have this:
Is it really necessary to learn how to calculate loop diagrams in QFT?
In the Wilsonian approach, you only need to calculate tree diagrams.
In the loop approach, you have to relate the experimentally measured coupling constant to the bare coupling constant, and I guess the difficulty is...
Homework Statement
In each of the two free-body diagrams, the forces are acting on a 2.6 kg object. For each diagram, find the values of ax and ay, the x- and y-components of the acceleration, with F1 = 5 N and F2 = 3 N. Picture is attached.
(a) Diagram A
ax =____ m/s2
ay =____ m/s2
(b)...