Hi,
Will there be interference if I point the laser thru one of the openings of the double slit aperture only while the other one is open?
And is the interference more pronounced or the same if I shine it thru both the apertures at the same time.
Homework Statement
Homework Equations
(1) Φ = 2π*(dsinθ/λ)
(2) Itotal = I0 cos2(Φ/2)
(3) Itotal = I0 cos2(πdy/λR)
λ = 585 * 10-9 m
R = 0.700 m
d = 0.320 * 10-3 m
y = ?
The Attempt at a Solution
a) I used eqn (1) and divided the total oscillations by a complete oscillation to find the...
The spatial orientation of the double slit setup be so that the screen extends in a plane ##x = constant##, while the entire apparatus sits on a ray perpendicular to the screen (of course, the slits sit and extend a bit off this ray).
My questions are about the dynamics in x-direction if only a...
Instead of using a single source and two slits, imagine just using two sources the same distance apart as were the slits...
The two sources are controlled by a device that has two modes of operation, selected by a two position switch labeled D and R:
D is "determined" - the emission from the...
i would like to find the detailed calculation in the case of a two slits experiment with an excited atom.
i only found the formulas when it decays near the slits.
have you links?
thanks
Hi all!
I'm a physics enthusiast and I've been reading/watching a lot of stuff about the double slit experiments. I was watching a youtube video about the delayed quantum eraser experiment and it was really interesting and got me thinking. So here's my question.
What if the detector is placed...
What would happen if you send a particle towards a double slit, it goes through interacting with itself quantumly, however before it reaches the screen it decays emitting radiation (Alpha, beta and/or Gamma)?
Would you still see the same pattern on the screen?
Would it affect the wave function...
It is said that if one shoots photons in a double slit experiment, and place a detectors around the slits to find which slit the photon went, one will not see the photon interfere. However, to detect a photon, one must absorb it. So how does the photon detectors work by detecting the photons and...
If you created the following double slit experiment would you still see interference?
1) Modify the slits so that the path from photon source through one of the slits to the detector is much shorter than the path through the other slit.
2) put a shutter in front of the photon source so that you...
When particles are shot at the plate/screen in the double slit experiment, why doesn't the particles interact with the screen? Shouldn't the plate act as an observer and "collapse" the wave function into one or the other slit? Why does it take a measuring apparatus to know which slit the...
hi
are the path lengths to the slits strictly equal?
If the difference of the path lengths is progressively increased, how evolve the fringes visibility?
I was wondering if it would be feasible to set up something like the following experiment to validate the pilot wave theory. The idea here is to set up a double slit experiment, but control the initial conditions of photons emitted from a source (i.e., their directions) such that one can...
Homework Statement
If a green laser is (wavelength = 532nm) sent through two slits with a separation of 127 um, how wide (in total) would the 11 green dots formed be if they were projected onto a screen 1.25m away from the slits?
Refer to this diagram sorry for bad quality...
Just for my knowledge, not to confuse the OP, why would you say, for example, the double slit experiment does not show both of these properties in one measurement method?
[Mentors' more: this thread was forked off from another thread]
Hi all!
In Young's double slit experiment, there are two things I cannot explain. Any help is appreciated!
The first one is why the bright fringes get dimmer as you get further from the central/brightest spot. My theory, after looking in the two books I have, is that each single slit decreases...
Homework Statement
For accurate measurement of the fringe separation, a small as possible slit separation should be used. Homework Equations
s=λD/d
The Attempt at a Solution
Why is this statement correct ?
Homework Statement
Suppose a double-slit experiment is immersed in water (with an index of refraction of 1.33). When in the water, what happens to the interference fringes?
Homework Equations
λ = λ0 / n
y = (λmL) / d
d = distance between slits
L = distance to viewing screen
n = index of...
Hi,
I'm doing a very simple problem, but I don't understand the diagram provided (see image below).
What is m here?
I know that m is the order with respect to the central bright fringe, but there isn't a central bright fringe (assuming those circles are the bright fringes)?
Homework...
Hi all
I was wondering what happens if one slit in youngs double slit is bigger than the other?
I recon that the of maxima will rise and in minima, there will be no dark spot, but dim light instead. Is that correct? If not can you please explain what happens?
Thanks
What would happen if a youngs double slit experiment is done with different slit sizes? I get the feeling that the intensity might never be zero as the waves might never cancel out completely. Am I right? How should I analyse the Intensity?
Would I have to do something like what is done while...
I am reading about this most famous experiment in physics, the double-slit experiment.
My question is very simple: in the "Delayed Choice" version, have they done the test where they close BOTH SLITS (at once) after the photon has passed the slits??
If so, what have been the result?
Can you...
Homework Statement
a) Explain why a pattern of bright and dark fringes visible on a screen when a light is shone through a double slit.
b) Upon using Thomas Young's double-slit experiment to obtain measurements, the following data were obtained. use this data to determine the wavelength of...
1. The problem statement, all variables and given/known da
Homework Equations
Interference minima is asinΘ=nλ/2 where n=1,3,5,7...
[/B]The Attempt at a Solution
Putting ab/(2sqrt(b^2/4+d^2))=λ/2 for first order minima
And solving for d I get (b/2)*sqrt((2a/λ)^2-1) in which only the 2 factor...
Homework Statement
Hi
The experimental setup involved a helium neon laser of wavelength 670nm +- 1nm, pointed towards a lens with focal length 500mm +- 1mm. (so that the equations used corresponded to the far field diffraction pattern) and onto a photo diode so that for all intents and...
How exactly does the mere act of observing collapse the wave function of, say, photons? I don't quite understand that one. And Richard Feynman's question related to Young's double slit experiment and the fact the electron went through both slits, as well as neither, and just one slit, and just...
Hi, I have two questions concerning the double slit experiment in the scenario where we fire one photon at a time and it interacts with itself to create an interference pattern over time:
- Does the photon actually interact with itself or with the photons fired before/after it?
- What happens...
I have two questions about the following type of scenario:
We have a laser sending photons through the usual double slit apparatus giving us the usual interference pattern, except that now we introduce some physical matter (that are not photons) that the photons will interact with before going...
Special Relativity dictates that if there is relative motion between two objects; their relative experience of time will change and this is measurable at velocities approaching 'c'.
Within the context of the Double-slit Experiment (with detection): When a given quantum-duality is detected by a...
Let's say we do a double slit experiment with the standard laser/two slit setup with a screen to view the pattern.
1. In the first run, we just turn on the laser and observe the screen with our unaided eyes. We see an interference pattern consistent with the wave-like nature of light, correct...
Homework Statement
Light of wavelength 600 nm passes though two slits separated by 0.20 mm and is observed on a screen 1.5 m behind the slits. The location of the central maximum is marked on the screen and labeled y = 0.
A very thin piece of glass is then placed in one slit. Because light...
As I understand the double slit experiment, an interference is created on the barrier. Usually the drawing is made as the constructive waves hit the wall perfectly in middle. Let's say the wave has a frequency f, the interference should be moving away from the middle at time t+f/4. Why we don't...
Hi, what is the cheapest double slit experiment setup or others where quantum state like qubits are isolated and can be experimented upon?
I saw the following in the net. It has a double slit inside the tube and the output is displayed on a monitor. I guess (not sure) it costs only $200. Has...
Hello there,
I have a question about the double-slit experiment and conscioussnes.
Excuse me if I don't formulate things right and might come over as a total fool for asking this (English is not my native language and i don't study physics).
I just saw this video: <Moderator's note: link...
Homework Statement
From a procedure standpoint, our experiment consisted of a laser pointer on a retort stand with a holder, shining through a piece of sheet with slit measurements (I believe it's acetate) and measuring the height of the maxima on a whiteboard. What could be improved with this...
From a procedure standpoint, our experiment consisted of a laser pointer on a retort stand with a holder, shining through a piece of sheet with slit measurements (I believe it's acetate) and measuring the height of the maxima on a whiteboard. What could be improved with this experiment?
I understand Young's Double Slit Experiment, which basically consists of pointing a laser through two slits and seeing the maxima with different brightness, caused by constructive and destructive interference respectively. Through the experiment, I know that increasing the distance between the...
I have a few basic questions about the double slit experiment and was hoping someone might be able to answer them.
1) How far apart from each other would have I have to make the slits so effectively no detection took place? E.g. is there a limit to how far the wave function can spread and a...
Here is a setup that only uses fixed detectors.
Will the ratio between the number of detections at D0 and the sum of the numbers detected on D1 and D2
be close to 1?
For this question instead of the coincidence counter, 3 simple counters are needed.
Also the detectors D1 and D2 need some lenses...
How true is this? Do you believe that in the double slit experiment, what is subsequently measured at the detection screen is actually the particle’s momentum?? How does this differ to the normal double slit explanation of the particle being deflected left or right of the slit, etc...
1. The problem statement, all variables, and given/known data
The problem is attached.
Homework Equations
I do not know any relevant equations to this matter but I believe that a maximum has the length of λ and a minimum has the length of λ/2.
The Attempt at a Solution
I see one maximum and...
Apologies if this is a ridiculous question (I have zero scientific education). I recently watch a video about retrocausality and thought that this may be an explanation for the wave properties of a single photon fired in the double slit experiment. My scientific ignorance will be on full show...
I think we can all agree that when we are shooting many photons one by one, through an interferometer, we can eventually land up with the interference pattern. This can be explained by saying that two photons combining in some areas to give four photons and in some places annihilating each...
In the double slit experiment , if one place only one detector around one slit, while leaving the other slit unchecked, the interference pattern vanishes. Does this show entanglement?
In a 'one photon at a time' double slit experiment, does the interference pattern still emerges if the time delay between individual photon emissions is increased to minutes or even hours?
Dear All,
I have a couple questions on the double slit experiment I hope you can help shed some light (or photons) on. =)
Arrival Timing of Photons
In a normal double-slit experiment like the above setup, do photons always arrive at the detector at a constant speed (basically, speed of light)...
Dear All,
I have a question on the double slit experiment. From the references I've read so far, they are focusing on the results of the detector AFTER the 2 slits.
Let's say when photons are fired, how many % actually pass through the slits and get detected at the end? Would some (and how...
Hi, my answer is about the double slit experiment: the interference is observable with the water waves, them are particle in movment, but when we observe it with the electrons, what is the medium for those waves? Are the particles made of matter between the gun and the slits? Or is it something...