Calculating Electron Mass from Magnetic Field and Potential Difference

  • Thread starter Thread starter invinc1ble
  • Start date Start date
  • Tags Tags
    Physics Physics 12
AI Thread Summary
The discussion revolves around a Grade 12 physics problem involving the calculation of electron mass using a magnetic field and potential difference. The magnetic field is given as 3.4E-3 T, and the potential difference is 250 V, leading to a derived electron mass of 7.25E-31 kg, which is lower than the known mass of 9.11E-31 kg. Participants confirm the calculations using the formula m = (B^2 q (2r)^2) / (8V) and arrive at the same result. There is a suggestion to verify the problem's details, particularly the magnetic field value. The conversation concludes with confidence in the calculations based on consistent results among users.
invinc1ble
Messages
5
Reaction score
0
I don't know if this is the place to post this, but This is a simple Grade 12 Physics question that I have been working on for about half an hour now.

For those who don't normally use this notation,
2E10 = 2X10^10.
2E-2 = 2X10^-2

"A magnetic field of 3.4E-3T deflects electrons into a circular path of radius .014m. The electorns have been accelerated through a potential differenc eof 250V. If the charge of an electron is 1.6E-19C, what is the mass of the electron?"

I have done it three times, and I keep getting 7.25E-31Kg when in actuality, a real electron is 9.11E-31Kg
 
Last edited:
Physics news on Phys.org
Do you really mean 3,400 tesla? I doubt it.

- Warren
 
sorry.. i'd make that 3.4E-3T
(.0034)
 
I did this question from a worksheet, and we both got identical answers.

If you have the same answer that my friend and I do, then chances are it is correct.

Thanks for your help!
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Back
Top