E-field of an ununiformly-charged rod

  • Thread starter Thread starter nahya
  • Start date Start date
  • Tags Tags
    E-field Rod
AI Thread Summary
A particle with a mass of 5 g and a charge of -11 µC is moving in a uniform electric field of 450 N/C directed in the -y direction. The initial velocity is 35 m/s at a 25° angle above the x-axis. The calculated force acting on the particle is 0.00495 N, leading to an acceleration of 0.99 m/s². The x-coordinate at t = 5 s is determined to be 158.60 m, but there is confusion regarding the correct calculation of the y-coordinate due to the electric field's influence. The discussion also touches on a calculation error related to the conversion of units and the final answer needing to be expressed in N/C.
nahya
Messages
27
Reaction score
0
ballistic particle and electric field

Throughout space there is a uniform electric field in the -y direction of strength E = 450 N/C. There is no gravity. At t = 0, a particle with mass m = 5 g and charge q = -11 µC is at the origin moving with a velocity v0 = 35 m/s at an angle q = 25° above the x-axis.
---
i found out that the magnitude of the force acting on the particle is 0.00495 N.
the question is this: at t = 5 s, what are the x- and y-coordinatesof the position of the particle?
x: 158.60 m, but I'm having trouble finding out what the y-coordinate would be, because of the electric field present in the -y direction.

i tried this:
the initial velocity in the y diction is 35 sin 25'.
then, v_y = 35sin25 - at, where a = F/m. I've already found F, and m is given. so, a = 0.99
then, v_y = 35sin25 - 0.99t. plug in t, i get 9.8416. but that's wrong.
what am i doing wrong?

thanks.
 
Last edited:
Physics news on Phys.org
The integral is correct. How'd you get 7.2e10? K is of order e10 and A of the order e-6 so you should get something of the order e4.
 
doh! i forgot that A is in µC.
so... 2 * 9e9 * 4e-6 = 72000, and it's still wrong...
the answer's supposed to be in N/C.

edit:

oh. -72000. hehe.
thanks!
 
Last edited:
i'm recycling the thread. old post was edited to a new question.
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Back
Top