What is the equivalent capacitance between points A & B?

Click For Summary
The discussion focuses on calculating the equivalent capacitance between points A and B in a circuit with capacitors. Initially, it is proposed that the capacitors are in parallel, leading to an equivalent capacitance of 2C. However, further analysis reveals that the capacitors are actually in series due to a zero potential difference across certain points, resulting in an equivalent capacitance of C/2. The conversation emphasizes understanding the circuit's configuration and the implications of steady-state conditions on current flow. Ultimately, the correct interpretation of the circuit leads to the conclusion that the capacitors on the left are in series.
Kronos
Messages
3
Reaction score
0

Homework Statement


Find the equivalent capacitance between points A & B

1.png

Homework Equations



Ceq1 = C + C
1/Ceq2 = 1/2C + 1/2C + ...

The Attempt at a Solution


[/B]
It is my understanding that each capacitor top and bottom are connected in parallel, so their equivalent is 2C.

2.png

Now, they are all connected in series, so their equivalent would be:
1/Ceq2 = 1/2C + 1/2C + 1/2C + 1/2C

Thus,
Ceq2 = C/2

Is my reasoning acceptable?
Thank you.
 
Physics news on Phys.org
Kronos said:
each capacitor top and bottom are connected in parallel
If the effective capacitance sought were between the left hand side and the right hand side, that would work. But it isn't.

Is there more context here, like an applied varying potential?
If not, think about potentials. What might the potential difference be between the right hand side of the top left capacitor and the right hand side of the bottom left capacitor?
 
The potential difference would just be zero since the capacitors are at steady state. Thus, there is no current flowing through the wire w/ resistor, and by Ohm's law:
V = I*R
V = (0) * R
V = 0
 
Kronos said:
The potential difference would just be zero since the capacitors are at steady state. Thus, there is no current flowing through the wire w/ resistor, and by Ohm's law:
V = I*R
V = (0) * R
V = 0
Right. Does that help you simplify the circuit?
 
haruspex said:
Right. Does that help you simplify the circuit?
Yes. That means that the capacitor on the top left and the capacitor on the bottom left are connected in series, correct? Since the same charge will flow through them.
 
Kronos said:
Yes. That means that the capacitor on the top left and the capacitor on the bottom left are connected in series, correct? Since the same charge will flow through them.
That's how I read it.
 
Thread 'Correct statement about size of wire to produce larger extension'
The answer is (B) but I don't really understand why. Based on formula of Young Modulus: $$x=\frac{FL}{AE}$$ The second wire made of the same material so it means they have same Young Modulus. Larger extension means larger value of ##x## so to get larger value of ##x## we can increase ##F## and ##L## and decrease ##A## I am not sure whether there is change in ##F## for first and second wire so I will just assume ##F## does not change. It leaves (B) and (C) as possible options so why is (C)...

Similar threads

  • · Replies 28 ·
Replies
28
Views
2K
  • · Replies 4 ·
Replies
4
Views
5K
  • · Replies 5 ·
Replies
5
Views
2K
  • · Replies 7 ·
Replies
7
Views
2K
  • · Replies 67 ·
3
Replies
67
Views
11K
  • · Replies 9 ·
Replies
9
Views
2K
  • · Replies 11 ·
Replies
11
Views
3K
  • · Replies 1 ·
Replies
1
Views
3K
  • · Replies 12 ·
Replies
12
Views
2K
Replies
4
Views
1K