The Equations of Rotational Kinematics

AI Thread Summary
A spinning wheel in a fireworks display is experiencing a counterclockwise rotation with an angular acceleration of -4.00 rad/s², transitioning from an initial angular velocity to a final velocity of -25.0 rad/s. The angular displacement during this change is zero, leading to the need to calculate the time required for this velocity change. The relevant equations for rotational kinematics are provided, but the initial angular velocity remains unknown, complicating the calculation. The discussion reveals frustration over having two unknowns without sufficient information to solve for time. Ultimately, the expected answer for the time required is 12.5 seconds.
pstfleur
Messages
29
Reaction score
0
1. A spinning wheel on a fireworks display is initially rotating in a counterclockwise direction. The wheel has an angular acceleration of -4.00rad/s2. Because of this acceleration, the angular velocity of the wheel changes from its initial value to a final value of -25.0rad/s. While this change occurs, the angular displacement of the wheel is zero. Find the time required for the change in the angular velocity to occur.



2. W=Wo+xt
Displacement=1/2(W+Wo)t
DIsplacement=Wot+1/2xt^2




3. The answer is suppose to be 12.5s..
OK the initial velocity is what I don't have, i know that its going to be negative.. In order for me to get the Initial angular velocity, i need the Time, which I also don't have.. I don't know how to answer with two unknowns.
 
Physics news on Phys.org
hello lol
 
bump bump bump
 
bumping again for the 2nd day :)
 
Thread 'Voltmeter readings for this circuit with switches'

Thread 'Voltmeter readings for this circuit with switches'

TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
View full post »
Thread 'Correct statement about a reservoir with an outlet pipe'

Thread 'Correct statement about a reservoir with an outlet pipe'

The answer to this question is statements (ii) and (iv) are correct. (i) This is FALSE because the speed of water in the tap is greater than speed at the water surface (ii) I don't even understand this statement. What does the "seal" part have to do with water flowing out? Won't the water still flow out through the tap until the tank is empty whether the reservoir is sealed or not? (iii) In my opinion, this statement would be correct. Increasing the gravitational potential energy of the...
View full post »

Similar threads

What is the Linear Distance and Angular Velocity of a Rotating Potter's Wheel?
Replies
7
Views
2K
What Causes Discrepancies in Calculating Initial Angular Velocity?
Replies
2
Views
2K
System of two wheels of different sizes with an axle through their centers
2
Replies
67
Views
4K
2 Masses and a Wheel (with mass)
Replies
6
Views
828
Rotational Kinematics Time Problem
Replies
1
Views
2K
Perfectly inelastic collision of two moving and rotating disks
Replies
9
Views
2K
What is the net acceleration of the coin on a rotating disk?
Replies
2
Views
2K
Rotational torque and kinematics of a rod
Replies
5
Views
2K
Why can we use this approximation in rotational work-kinetic energy theorem for small displacements?
Replies
7
Views
1K
How Can I Solve These Rotational Kinematics Problems?
Replies
3
Views
4K

Hot Threads

Recent Insights

Back
Top