Hi pf,
I am currently a fourth year student who has recently switched majors from biochemistry to EECS (so I'm going to get my bs sometime around 2013-2014). And since I'm pretty much back to square one, I am in need of some basic advice with regards to how to get into a top tier EECS program...
Homework Statement
I am currently doing my thesis, and the gravimetric analysis data I receive from a partner laboratory is in the form of tables in PDF Files. I need to plot the data. It would be tedious if I copy and paste every cell manually, so I decided to automate it using a program...
I finished my undergrad last year and joined this phd program in fall. I passed the qualifiers in December, and over the two semesters, I have completed all the necessary phd courses, taking no master's courses. Early in the year, I was contacted by a Professor in hep-exp to try out his group...
This may seem like a naive question to some people.
I had always heard that Lqg can easily incorporate supersymmetry---that if there were any evidence of it, putting it into the theory would be straightforward.
This goes way back, to papers I read in 2003-2005. Not sure exactly which, but it...
I would like to study Maths or Physics for my undergrad and eventually, go to grad school. I can't possibly know if I'd want to go to grad school in science and I'm just curious with regards to what it takes to get into a Finance PhD program. For maths/physics, it is my understanding that very...
Chemists/Physicists: Is it advisable to take 3rd Bachelors program: BS Mathematics after first Double Major?
Well, my reason is that I ended up hating biotechnology (biochem in particular) and I'd like to see myself doing quantum chemistry (I'm a 5th year student of a Bachelor's program in...
This is part of the simulation program in Antenna field pattern. One part involve finding the position of the peak where:
AF=\frac {\sin\;Nx}{sin \;x}\;\hbox { where N is an integer.}
The peak is at x=0 and the AF=N. But excel do not accept this and call out as "DIV 0" error. Is there any way...
I want to study antenna patterns of different arrangements. I am looking for a very cheap software ( free is even better) to plot graph if I provide the \;R,\theta,\phi.
Even if 2D plot would be helpful like keeping either \;\theta\;\hbox { or }\; \phi\; constant and vary the other angle to...
Greetings, I'm an undergraduate electrical engineer with minimal programming experience and I'm here because I would like some advice as to how I should approach writing a program I'm interested in. I'm specifically interested in what programming language I should learn and use.
The purpose...
Hi,
I live on the East Coast (USA), and I'm looking into transferring from the college I'm at because it does not have a decent physics program/department.
Does anyone have any recommendations for unis/colleges that have really good ones? (I'm not talking MIT, Harvard, etc. I know I...
Hi everybody,
I've been deciding to transfer to another Ontario University (York University) and I have looked to see if the program that I am interested in is open and to my surprise the program is open. I have already applied to the program to be on the safe side, but if a program is still...
Hi all,
I'm a phys junior in Spain thinking of doing my final undergrad year in another country in the EU, assuming I maintain my grant status in my senior year. My uni offers an exchange program at Copenhagen university which really caught my eye. There are many final year electives/grad...
Hi,
Below is a fortran program to calculate the roots of an equation by Newton's method.
I compile the program with the free compiler g95:
g95 -c Newton.f95 then g95 Newton.f95 -o Newton.exe
When I run the program Newton.exe I get the error can't assign value INTENT(IN)::x to...
I am curious to know if someone from a physics Masters program at a state school (high GPA, excellent research) has the the same chance of admission to Harvard, Princeton, or MIT PhD program vs someone with similar stats from undergraduate. How hard is it to get into top 10 schools from Master's...
Hi
I write M-file that call 'Program.exe' by SYESTEM command and go to the Program.exe Environment .now i need apply a command of 'Program.exe'. But i cannot control application with Matlab because Matlab go to 'Program.exe' Environment and 'Program.exe's command only is Executable and it is...
I'm about to start a PhD program at a top 5 school but I'm just not feeling excited about it. I feel burnt out and I've lost my enthusiasm for physics. As an undergrad I worked ridiculously hard and sacrificed my social life for physics and I just feel like I can't do that for another six...
Call me paranoid if you will, but is there any handy tool that keep a track or can find out what program that has a possibility/ability of internet connection, has visited what directory by what time?
It could be a stand alone software, could be something that comes with windows. Does anybody...
I just took my balance in my 401K program out of all stocks, bonds, and corporate stock funds and put the into FIXED. I never thought I would see this day happen, but what I see (not happening) in Washington in addressing the debt limit gives me cause for concern.
IMHO, it is better to...
Would I be able to get into any PhD Program for applied math? Would you please recommend some PhD and/or masters (with funding) programs to apply to? I'll be graduating in Spring 2012 and unfortunately, my undergrad institution only funds for an extra semester, so my only choice is to apply to...
Hi guys ,
I am currently studying in Toronto , and will be starting my grade 12 coming september.
I heard that I'm going to have to apply to Universities in december/january , and I have some issues with the program I want to go to and was wondering if i could get some help!
I am not...
Hi, I am working on binary (greyscale) image manipulation through C++ arrays. At school we use Photoimpact 7 to see the resulting image in .bin format... is there any free application i can use to do the same at home?
I have a paper to write for linear algebra, and it has some mathematical notation, (sums, matrices, things like that). I was wondering what program I might use to type it so it looks pretty like a math test. Always wondered how they did that... I have access to an assortment of programs via the...
Hello everyone!
Being new to the community, this is my first thread...
What i need to inquire is that which US universities offer a terminal
masters program in physics?
Thanks in advance.
Abhishek
Homework Statement
Write a C++ program that accepts 10 floating-point values from a user and determines and displays the average and the standard deviation. All values more than four standard deviations away from the average should be dropped and then the new average and standard deviation...
Need opinions, I'm entering my "Senior" year in physics, and have a had a tumultuous academic past. I changed majors a lot before settling on physics and used to withdraw from classes halfway through the semester because I'd get bored with Gen Ed's etc. Last semester I had a rough go of it...
My gfortran compiler gives me the following message when I try to open a file in order to read it:Fortran runtime error: No such file or directory
logout
The line in the program where this file is is written in this way:
OPEN(UNIT = 7, FILE = 'GPROP.DAT', STATUS = 'OLD')...
Hi...
I have just started using GRtensor...
I realize that the calculations in GRtensor have to be done only after specifying a metric...
Is there any package which can directly do symbolic manipulation without using the metric?
Hello everyone,
I'd really appreciate if you could spare a minute.
I've finished my high school, and have achieved a decent rank at a premier engineering institute.
Now the problem before me is this: which stream should i go for?
I have always been quite good at physics (Mechanics was my...
I am looking for a very simple downloadable program that allows me to create simple 2D designs of mechanical parts. One that let's me quickly create links/ pivots and move them to simulate movement. Almost like a Google Sketchup but for engineering and even simpler. I am not looking for a game...
The colleges I have been looking to apply to seem to have different schools/programs for engineering and sciences(L&S). How different are these programs for majors for such as physics and engineering? I've never done any sort of engineering in high school so I can't really make an educated...
I want to interpolate a set of points (x(i),y(i)) for i=0, n; using Newton's polynomial of degree n.
I've Kincaid's book of numerical analysis. He gives an algorithm that doesn't make entirely sense to me.
He says for
i=0, n do
di <- f(xi)
end
for j=1, n do
etc.
Basically I'm stuck...
To be honest, I have a few questions.
1) I want to design more efficient technology involving sustainable energy. What engineering program should I try to get into? (I'm going to the University of Waterloo for physics in September but plan to switch ... maybe.)
I know environmental...
I want to learn a computer program I know of a few c# .C++, python but I am not sure which one to start learning with , My goal is to write a basic computer program like a bot or computer software and also maybe a basic game would be fun ,
Hello!
I'm looking for a computer algebra program, which supports Grasmann variables.
I have some calculations with Grasmann Lagrangians.
Can anybody help me?
Thanks,
Omega
Homework Statement
Consider the following puzzle. You are to choose 4 three-letter "words" from the following list:
ECB EFH BEJ GGE HIJ CDE GEG CBJ
For each word, you earn a score equal to the position that the word's third letter appears in the alphabet. For example, ECB earns a score...
Homework Statement
I am trying to write (for my own interest) a program in C that solves a simple 1-dimensional physics problem. I want the program to determine the times (after t=0) of the first ten collisions for two elastic balls constrained between elastic walls at x=0 and x=a.
The user...
Hi guys!
I am writing a program that reads in a single sentence up to the period. The program outputs the modified sentence with all of the spaces removed and replaces each of the vowels with the letter 'Z'.
Here is my code but I am stuck and I don't understand what's wrong, can anyone...
I seek to transfer a program from the Start menu of my old computer to the Start menu of my new computer.
Of all the files which transferred from my old computer to my new one, this one was apparently left out. My old computer has only floppy disk, and the new, only CD. Is there a hardwire...
TI-89 "PAY" program, infinite loop problem?
I have tried to write a program required for class (Math Analysis, junior in high school, everyone else has an 83 or 82 but my grandmother bought me this one...so nobody else has been able to help yet) but after solving one error message (I had to...
I am a math major and I am in my 3rd year of undergrad. So I will be applying to grad schools in the fall. I would like to get a PhD. My only worry is that I am only an average student in my math classes. I believe that I am more passionate about the subject than most math majors. I work hard...
Hello!
I am currently looking for a fractal program for my mac, preferably with free download :)
I want to be able to draw a pattern and the program compares this to a fractal that it can generate (hope that makes sense). I mean that instead of entering the complex number in say a julia set...
I am a math major, physics minor senior. Generally speaking, how does the difficulty of an economics master's program compare to my undergrad?
Well, I put this in the Social Sciences forum because I thought the people who post in there would have a better idea. This forum really just seems to...
I want to write a classical program, which simulates a quantum algorithm. Any suggestions for which programming language would yield the best results, which algorithm would be the best to emulate, and what's the best way to go about beginning?
Thanks
I have an external program (A chess engine) that I want to interface with matlab. If I double-click the Engine.exe, it runs in a dos window. I can then type in commands like
'isready' and it responds with string such as 'ready'. I want to send command to it from MATLAB and receive the response...
I am attempting to write a program to do the work for me. I started in the process by hand and it took about an hour to get through the letter a. So I have a folder with many sub-folders and each sub-folder has at least one sub-sub-folder and then in theses many sub-sub-folders are the...
Hi all,
I am starting a Physics MS program in the Fall and have a few different opportunities to do research. I am wondering where I would best be positioning myself to continue on to a Medical Physics program. Which area of research would be best?
One I am considering is condensed matter...